Pages

Saturday, July 10, 2010

Framing fiber art

 A nice way to finish a small piece is to frame it. This makes the piece less likely to get soiled by dirt or dust, and makes it more appealing to people uncomfortable with how to hang fiber art. It also makes small pieces more finished and formal looking. I did this with House Rules 2 (above) last fall, but forgot to blog about it. House Rules 2 is 16.5" square. Today, Debbie wrote to ask me how I hung my smaller art quilts, so I figured this was a good time. 

Textile pieces should never be framed directly under glass, because any moisture that collects inside the frame can be pressed into the fabric, causing water marks or mildew. Either choose a shadow box, or add spacers between the glass and the mat. You can take your fiber art to a good quality framing shop and they can do this for you. Or you can do it my way, with a $20 frame from Ikea and a little elbow grease. If you choose this method, make sure you sign the back of your work so that it will still bear your name even if it is taken from the frame later.
Look for acid free mats (see Willa’s notes in the comment section after this post). I found a $20 shadowbox frame at Ikea (above). Measure your quilt, and then open the frame and measure your mat. Subtract the size of your quilt from the size of the mat. (Example: Your quilt is 17" square, and the mat is 20 inches square, so 20-17=3. Divide this number by 2 (Example 3÷2=1½.) Add 1/8" to this measurement (Example 1½ + 1/8 = 1-5/8".)



On the back of the mat, draw a pencil line that is this far in from the outer edge, around all the sides (above). My piece was square, so I drew in the same distance on all sides. 
Place the mat on an old, clean towel. Use a heavy needle or nail to punch holes along this line every ½" or so (above). You don't want the holes to be too big, but they need to be big enough that you can pass through them with the needle and thread you’ll be using in the next step.
Thread a smaller needle with heavy thread, such as hand quilting thread. Place the quilt on the top of the mat and align it with the holes. Take a stitch on the back of the quilt so that your knot is on the back, and bring the needle out at the corner. Go down through the corner hole (above) and come up through the next hole (below).
 Take a small stitch through the back of the quilt (below). Try to get all the layers except the front (because you don’t want your stitches to show on the front). 
 Go back down through the same hole (see below), and then on to the next one.
Continue in this manner, pulling the thread taut every few stitches, until you have gone all the way around. If your thread runs out, make a large knot on the back of the mat. Secure your stitches with tape on the back (below). Acid-free artist’s tape offers the best protection for your piece (see Willa’s comment below this post).
Remember to sign your name and date on the mat with a Micron Pigma pen (below). Most artists sign in the lower right corner.
 Clean the glass, insert the mat with the quilt stitched to it, and finish framing according to the frame’s directions. Voila! Now you can hang your fiber art the same way you’d hang any other piece of art in your home. 

NOTE: These directions are now available in a PDF format you can download, print out and save. To download, go to the “Free Stuff” icon in my blog sidebar, or simply click here.

21 comments:

  1. Thanks for sharing! I have several pieces that this would work well with.

    ReplyDelete
  2. I would respectfully suggest being aware of materials in a project like this. If the fiber piece is of any value and longevity is desired, use only an acid free mat for matting or mounting. Also, an acid free artist's tape rather than masking tape will further protect the art work.

    There are currently quality materials readily available. Also in the art world there is information about the products that protect the integrity of your art work.

    ReplyDelete
  3. Susan, great idea, thank you for posting this!

    ReplyDelete
  4. Thanks for the tutorial. I have a small block that I was going to make someone for Christmas and this is the perfect way to finish it!

    ReplyDelete
  5. This is WONDERFUL information - thank you so much for posting. I have a bunch of small pieces that would benefit from framing, but having them custom framed is prohibitively expensive. You're a gem!

    ReplyDelete
  6. Thanks for the great tutorial. The photos showing the actual stitches are really helpful. I'm going to try it.

    ReplyDelete
  7. Thank you for this detailed tut. The pictures were great, very helpful!

    ReplyDelete
  8. Thank you for this tutorial. Great way to show smaller pieces and looks so professional too.

    ReplyDelete
  9. Very helpful post - the photo's help us visual learners :-)

    ReplyDelete
  10. Thanks for sharing. Will you post this in your tutorial list? It will make finding it easier in the future.

    ReplyDelete
  11. great tutorial!
    Here are a few other options - mounting on painted canvas, plexiglass, etc.
    http://www.lyrickinard.com/tutorials.html

    enjoy!

    ReplyDelete
  12. What an excellent tutorial, Susan. Thanks so much!

    Leslie
    http://leslietuckerjenison.blogspot.com/

    ReplyDelete
  13. Yes, Lindi, I'll work it up in PDF format, and add it to the list of tutorials in the sidebar on my blog. Thanks for reminding me to do this! :-)

    ReplyDelete
  14. I appreciate the information. It will make my life easier and my small quilts shine!

    ReplyDelete
  15. This comment has been removed by a blog administrator.

    ReplyDelete
  16. Thanks Susan for taking the time explaining this to me yesterday and then posting it for all the others. I know it will come in handy for many of my small quilts. Debbie

    ReplyDelete
  17. I like how you sewed it to the mat, nice technique.
    I was thinking of framing some smaller pieces and I have frames that I collect from thrifts or sales. I get wood, then I can repaint them to match my pieces. I also found that double sided rug tape is perfect to hang small pieces onto the wall.

    Debbie

    ReplyDelete
  18. Great photos, Susan. This is exactly how I do it although I am always looking for new options. There are quite a few who mount with gel medium or velcro and I just can't bring myself to do that... yet:)
    I like knowing that once they are sewn on, I don't have to worry about them coming undone.
    Thanks for sharing.

    ReplyDelete
  19. thank you for posting this great tutorial! Just today I framed a single block over a wooden frame and I'll give your method a try, shure!

    ReplyDelete
  20. Love the little pieced that you framed... and loved the way you framed it. I will certainly try this with smaller pieces... I'm wondering what suggestions you might have for a bigger quilted piece. I want to frame it on top of a regular frame with the back of the quilt resting on a full sized matt and then sewn down around the edge so that the front part of the frame shows... the piece is roughly 3'X4'. Thanks... TEMA

    ReplyDelete

I love it when you leave comments… Otherwise I feel like I'm just talking to myself! If you have time to write, please let me know what you think.